產品介紹：
EW係列PC切腳機是利用高速旋轉的鎢鋼合金刀片，對電路板浸錫焊後的餘腳進行切除加工的專用設備，它主要由特殊的單相電動機，鎢鋼合金刀片，轉動係統，推送器及電控係統等部分組成，其特點是：操作簡便，結構新穎，低噪音，送料簡單快速，切腳平滑，調整方便運行平穩，PCV可切到0.8mm，不會切到基板，最大PCB板尺寸，長400×250mm，產品推出以來，深受用戶歡迎。
產品型號： 手推式切腳機 EW-17A
規格： L1100*W500*H800m/m
技術指標： Power:AC110V/220V 60Hz/50Hz
Size：L960×W470×H800
Weight：65Kg
product description:
EW series PC cut the foot is the use of high-speed rotation of the tungsten steel alloy blade, the circuit board after the dip of the foot after the cutting of the special equipment, which is mainly by a special single-phase motor, tungsten steel alloy blade, Push the device and the electronic control system and so on, which is characterized by: simple operation, novel structure, low noise, feeding simple and fast, smooth foot, easy to adjust smooth operation, PCV can cut to 0.8mm, not cut to the substrate, the largest PCB board size, length 400 × 250mm, since the introduction of products, welcomed by users.
Product Type: Hand-cut cut-foot machine EW-17A
Specifications: L1100 * W500 * H800m / m
Specifications: Power: AC110V / 220V 60Hz / 50Hz
Size: L960 × W470 × H800
Weight: 65Kg
